A 20 degree angled mount for the Tilta Power Supply Base Plate so you can mount your RS2/3/4 gimbal on the KDCM mounting pattern (61 x 50.8 mm M4 holes). This mount allows a 20 degree tilt, so when flying forwards the gimbal is in a more upright and stronger position, allowing good gimbal performance at higher speeds and in corners.
It can be mounted from the top or the bottom. You can screw it in from the top, through the M4 clearance holes, into a frame or mounting plate. And you can also screw into it from underneath, into the separate M4 threaded holes. This allows it to mount onto the KD11 QR Camera Plate, or anything else that needs to be mounted this way.
Specs:
Weight: 97g
Size: 82 x 60 x 31 mm
Mounting: 61 x 50.8 mm M4 onto any frame (same as the KDCM/DAC mount), 61 x 50.8 M4 threaded from underneath, 1/4-20 and 3/8 holes/slots for the Tilta Base
Includes:
- Black anodised aluminium mount
- 4x M4 x 8 mounting screws
- 4x M4 x 10 mounting screws
- 2x 1/4-20 x 1/2 inch countersunk screws
- 2x 3/8-16 x 1/2 inch countersunk screws
Recommended for this mount:
- KD11
- KD9