top of page

BNF lead time is 3 - 6 weeks from ordering. Contact us if you need it sooner, or for any custom requests.

KD9 X8 is a 9" X8 cinelifter designed to carry a Red Komodo, Sony FX6, Freefly Ember or similar. It has a unique I-beam design made of vertical arms clamped between two continuous plates. This creates an insanely strong and stiff drone, while being one of the lightest in it's class at only 1,450g.

 

KD9 X8 has KDCM/DAC camera mount holes in the middle and slightly forward, and also naked BM mounting holes on top. You can go down to 10 degrees with no props in view on a 9mm lens, and 0 degrees on a 15mm lens. The battery is bottom mounted for great CG balance and lower moment of inertia, and protected with a battery plate that also acts as landing gear.

 

YouTube Video: Overview - Flight Footage - Build Guide

 

Specs:

Weight: 1,450g (drone only - options may vary)

Size: 360 x 283 x 115 mm

BNF includes:

- KD9 X8 drone. Built, tuned, and tested

- KDCM

- 8V / 12V BEC with XT30 out for camera power

- Xnova 2812 1100kv motors

- Spare set of props

- XT90 battery port

 

Recommended Parts (not included):

- 6s 15000mAh Kinetic Density Semi Solid State Battery or 6s 4500-6000 mAh Lipo


Note:

This is the drone only. You need a controller, goggles, and batteries to fly it, as well as experience with FPV and Betaflight. You are responsible for any local regulations and using this drone accordingly.

KD9 X8 BNF

No reviews
From £2,995.00Sale Price
Excluding VAT
Quantity
    No Reviews YetShare your thoughts. Be the first to leave a review.

    Any Questions?

    Contact on WhatsApp by clicking the button below.

    Shipping questions? Build tips? Please reach out about anything!

    bottom of page