top of page

BNF lead time is 4 - 8 weeks from ordering. Contact us if you need it sooner, or for any custom requests.

 

KD11 X8 is an 11" X8 cinelifter designed to carry a gimbal or hard mounted camera payload up to 5kg for over 7 minutes. It has a unique dual I-beam design made of vertical arms clamped between two continuous plates. This creates an insanely strong and stiff drone, while being very light and protecting internal 12S individual ESCs.

 

KD11 X8 has quick release rails on the bottom included, and mounting to add identical quick release rails on top (available here). Batteries and camera/payloads can then be mounted on top or bottom, with 3 very easy locking positions (20mm apart) on the quick release for CG adjustments. The KD11 Camera QR Plate allows easy quick release mounting with KDCM/DAC mounting holes and a 1/4 20 mounting slot. The KD11 X8 comes with 2 sets of KD11 Battery QR Kits, so you can quickly swap batteries and then have an assistant put fresh batteries onto the second QR plates while flying. These are intended for 2x 6S batteries to make a 12S setup.

 

There are also 5 KDCM/DAC camera mount hole sets on top for hard mounting a gimbal or camera, allowing you to mount anything in any position. You can use the KD Angled Gimbal Mount or KD Gimbal Mount to mount a DJI RS2/RS3 Pro/RS4 Pro gimbal. USB C extenders allow easy connection to the FC and VTX.

 

YouTube Video: Overview - Flight Footage - Build Guide

Specs:

Weight: 3,040g (drone only - options may vary)

Size: 440 x 340 x 150 mm

BNF includes:

- KD11 X8 drone. Built, tuned, and tested

- 1x KD11 QR kit

- 2x KD11 Battery QR kits

- 1x KDCM

- 1x KD Gimbal Mount

- 2x 8V / 12V BEC with XT30 out for camera/gimbal power

- Xnova 3220 490kv motors

- APD 120F3 ESCs

- Spare set of props

- Dual XT90 battery port (1x 6s battery per port)

 

Recommended Parts (not included):

- 2x 6s 15000mAh Kinetic Density Semi Solid State Battery or 2x 6s 4500-6000 mAh Lipo

- KD11 Battery QR Kit - (if you need more than 2x)

- KD Angled Gimbal Mount - (for flying faster with a gimbal)

- KD11 QR Kit - (if you need top QR as well as the included bottom QR)

- KD11 Camera QR Plate


Note:

This is the drone only. You need a controller, goggles, and batteries to fly it, as well as experience with FPV and Betaflight. You are responsible for any local regulations and using this drone accordingly.

KD11 X8 BNF

No reviews
From £5,995.00Sale Price
Excluding VAT
Quantity
    No Reviews YetShare your thoughts. Be the first to leave a review.

    Any Questions?

    Contact on WhatsApp by clicking the button below.

    Shipping questions? Build tips? Please reach out about anything!

    bottom of page