BNF lead time is 3 - 6 weeks from ordering. Contact us if you need it sooner, or for any custom requests.
KD7 X4 is a 7" X4 cinelifter designed to carry a Blackmagic 4KG2, Sony ZVE-10 II or similar. It has a unique I-beam design made of vertical arms clamped between two continuous plates. This creates an insanely strong and stiff structure, while packing a huge number of features into an only 710g drone.
KD7 X4 has KDCM Lite mounting holes in three positions, KDCM/DAC camera mount holes in the middle, and naked BM mounting holes on top. You can go down to 0 degrees with no props in view on a 7.5mm lens on the 4KG2. The battery can be top or bottom mounted for great CG balance and lower moment of inertia and a more compact rig. For bottom mounting you can buy a KD Battery Plate to protect the battery and act as landing gear.
YouTube Video: Overview - Flight Footage - Build Guide
Specs:
Weight: 710g (drone only - options may vary)
Size: 310 x 245 x 58 mm
BNF includes:
- KD7 X4 drone. Built, tuned, and tested
- 8V / 12V BEC with XT30 out for camera power
- Xnova 2808 1350kv motors
- Spare set of props
- XT60 battery port
Recommended Parts (not included):
- KD Battery Plate if you want to bottom mount your battery or make the X8 version
- 6s 12500mAh Kinetic Density Semi Solid State Battery or 6s 2000-6000 mAh Lipo (max 6s 3000 for top mounting the lipo)
Note:
This is the drone only. You need a controller, goggles, and batteries to fly it, as well as experience with FPV and Betaflight. You are responsible for any local regulations and using this drone accordingly.

