BNF lead time is 3 - 6 weeks from ordering. Contact us if you need it sooner, or for any custom requests.
KD7 X8 is a 7" X8 cinelifter designed to carry a Red Komodo, Sony FX6, Freefly Ember or similar. It has a unique I-beam design made of vertical arms clamped between two continuous plates. This creates an insanely strong and stiff structure, while packing a huge number of features into an only 1,140g drone.
KD7 X8 has KDCM Lite mounting holes in three positions, KDCM/DAC camera mount holes in the middle, and naked BM mounting holes on top. You can go down to 0 degrees with no props in view on a 7.5mm lens on the 4KG2 or 10 degrees on a Komodo with a 9mm lens. The battery is bottom mounted for great CG balance and lower moment of inertia, and protected with a battery plate that also acts as landing gear.
YouTube Video: Overview - Flight Footage - Build Guide
Specs:
Weight: 1,140g (drone only - options may vary)
Size: 310 x 245 x 95 mm
BNF includes:
- KD7 X8 drone. Built, tuned, and tested
- 8V / 12V BEC with XT30 out for camera power
- Xnova 2808 1350kv motors
- Spare set of props
- XT90 battery port
Recommended Parts (not included):
- 6s 12500mAh Kinetic Density Semi Solid State Battery or 6s 4000-5000 mAh Lipo
Note:
This is the drone only. You need a controller, goggles, and batteries to fly it, as well as experience with FPV and Betaflight. You are responsible for any local regulations and using this drone accordingly.

